Hydro Jetting and What You need to Know about it


A blockage is the last thing you would want to happen in your property’s plumbing system. This problem can be the root cause of many other issues such as clogged drains, inconsistent water pressure, and even contaminated water supply.

If you experience recurring plumbing problems, it’s best to consult a plumber right away. Slow drains and overflows are signs of a clogged sewer line. A professional plumber contractor should assess the condition of your plumbing system and see if it needs hydro jetting.

What is hydro jetting?

Hydro jetting is a process wherein the interior surface of plumbing pipes or sewer lines are subjected to high-pressure water. The objective of the procedure is to remove any accumulation of debris that may have caused the blockage. Water is blasted to clean the lines and remove the dirt that may have built up over time on the walls.

According to plumbing companies offering hydro jetting in Salt Lake City, the ideal pressure applied is 35,000 PSI (pounds per square inch). This force is usually enough to break down even the clumps of combined grease, dirt, hair, soap scum, and all kinds of debris, without harming the interior walls of your plumbing lines. There are cases, however, that streams as powerful as 60,000 PSI are needed to remove a serious blockage.

How is it done?

The process begins with an inspection. The plumber should first find the cause of the problem and the location of the problematic sewer. Once the location is determined, the plumber will feed a nozzle into the pipe or drain. The hose is connected to a tank that sends water into the pipes. A special machine is used to pressurize the water. The type and size of hose may vary depending on the size of the drain and type of blockage.

person snaking the drain of faucet

Other than water pressure, gravity also plays a big role in the hydro jetting process. Most plumbing systems rely on gravity to lead wastewater from residential properties to the local sewer system. Working from the bottom up, the hydro jetting tool breaks the clogged debris and flushes it out of the system.

Hydro jetting is also usually done in the sewer lines of restaurants. This is due to the accumulation of food particles and grease that were thrown down the kitchen sinks.

How is it more effective than snaking?

There are many reasons plumbers recommend hydro jetting over the snaking method, which you can do on your own. Plumbing snakes or plumbing augers only break the clog, but leave the buildup on the walls untouched. Hydro jetting not only breaks down sludge, grease, and scale but also flushes everything out of the pipes, leaving the interior walls clean as new.

Only a professional plumbing contractor should carry out hydro jetting. Pressurized water can lead to serious damage when not properly handled and when the problem is not sufficiently assessed. Make sure you get the service of a reputable, licensed plumber to ensure safe and quick operation. It is also advised to get a hydro jetting service on a regular basis. Not only will this keep your plumbing system in great condition, but will also save you from the nightmares brought by common plumbing issues.

Scroll to Top